There’s arguably nothing that can frustrate homeowners more than seeing their drains or sinks clogged. Congested drains not only cause inconvenience but also bring about an off-putting smell.
Drains clog for various reasons. It could be due to the accumulation of grease, fats, oils, and other food particles that you flush down the drain. It could also be due to the failure to maintain your drains and pipes regularly.
Sometimes, drains can be easily unclogged by using a plunger or a liquid drain cleaner. However, there are also instances where you’ll have to call local plumbers in Santa Clarita, SA for serious clog issues.
If your blocked drains require the expertise of a plumber, you should know that they can use two different methods to unclog your pipes: hydro-jetting and snaking. In the sections below, you will learn about the differences between the two.
What is Hydro Jetting?
As the name suggests, hydro jetting uses a pressurized hose to unclog your pipes. A machine creates water pressure which can then bust even the most stubborn clog out of your drain. On top of that, it can also be used to blast roots encroaching upon your pipes.
Before using the hydro-jet, professional plumbers will first conduct a camera inspection to diagnose the clog problem and check the condition of your pipes.
What are the Advantages and Disadvantages of Hydro Jetting?
If you are looking for a truly effective way to clean out your clogged sewer line, hydro jetting is your best bet. Its strong jet of water can not only remove blockages but also blast through tree roots. Aside from this, it can clean both domestic and commercial sewer lines thoroughly.
The downside, however, is that it cannot be used in old, fragile pipes. Sometimes, hydro jetting can work a little too well—the strong pressure can damage aging and brittle sewer lines.
Nevertheless, as mentioned earlier, plumbing companies will inspect your pipes first to check their condition before using the equipment.
What is Snaking?
Unlike hydro-jet, this method involves using a plumbing snake or drain auger to remove the clog-causing blockage. This is a long, slender, and flexible metal tube which can either be hand-cranked, electric, or battery-operated. It also has a blade or a corkscrew attached to its end.
The drain auger is pushed down the drain until it meets the blockage. Then, the crank is turned to grab the clog and pull it out, removing it from the pipe.
What are the Advantages and Disadvantages of Snaking?
Snaking has been around for a couple of years already. It is a tested and proven method for clearing basic clogs in drains and pipes. On top of that, it is gentler than hydro jetting, so it does not pose a threat to older pipes.
The downside is that it can only clear a path that is as wide as the tip of the plumbing snake. Additionally, it is usually only a temporary fix for drain problems. It can help clear basic blockages and improve drainage speeds; however, it may not be able to totally remove clogs, especially deep-seated and stubborn ones.
Both methods do help clear basic clogs and improve drainage speeds. However, if you are looking for an effective solution that brings long-lasting results, hydro jetting is the better option. It can completely remove blockages while also cleaning the lining of your pipes. To ensure a safe and hassle-free procedure, make sure to enlist only professional plumbing services in your area.
Looking for experts in hydro jetting in Santa Clarita, CA? We’re the ones to call! At The Rooter Drain Expert, we are a licensed and insured team of plumbers with top-of-the-line equipment to get any drain cleaning job done. If your sewer line is clogged and full of roots, call us on 661-641-4165 and we will provide you with a free, no-obligation evaluation.